Sawdust dryer/wood chips dryer mainly used for large scale ,high moisture small particle material , such as sawdust, wood chips, bamboo chips, shavings etc. After drying by hot air , the material reduce moisture greatly , easy to store ,transportation or for further process, briquette ,making pellet.
This drying machine is most often equipped with heating machines that utilize coal, natural gas, biomass, diesel or wood as fuel. To avoid ignition and accidents caused by high temperature, we design a special chamber between the drum and furnace that temporarily stores thermal energy and prevents sparks spattering onto the drying material. According to the fuel materials you use, we give suitable advices for heating equipment and dryers.
Material Feeding System
If the raw material is particle or shaggy, we recommend belt conveyor or screw conveyor. For sticky materials, belt conveyor is the proper choice.
When the cylinder dryer starts rotating, the raw material rolls and has a full thermal exchange with the heating equipment, leading to complete and uniform drying.
The discharging system is linked with a dust remover above and a conveyor at the bottom, with a high degree of efficiency.
Dust and ashes produced during the drying process will be collected to comply with the national environmental protection standard. The model of dust remover depends on the raw material.
Feature / Advantage:
Great handling ability, fuel consumption less, low drying cost.
High temperature resistant, can use high temperature and hot air to dry the materials rapidly.
sawdust dryer expanded ability is strong, design considered the production surplus, even if the yield increased slightly, also need not changing equipment.
The sawdust dryer adopts “self-aligning type” tug structure, the tug match up well with the rolling ring, and greatly reduce the wear and power consumption.
Equipment structure of self-aligning type tug, tug with roller ring fit well, greatly reduces the wear and power consumption.
Complete dust removal equipment.
|Model||Rotor diameter (mm)||Drum length (m)||Main reducer||Speed (r/min)||Production capacity (t/h)||Power (kw)||Volume(m3)||Weight (t)|
Packing / Delivery:
(1)FCL: in nude for standard exporting container.Machine fixed by steel wire rope.
(2)LCL: wood case
Dunnage bags are used for fixed the machine
Plastic film is covered on the machine as a rain-roof.